Svent purifying unit/EC-400-F7+HEPA H14-CG

terug volgende

€ 2660,00

Details
Reviews
Search-help
Extra

Er zijn (nog) geen klantbeoordelingen van dit product. Wees de eerste!

Er is helaas nog geen zoekhulp beschikbaar voor dit product.

Svent purifying unit/EC-400-F7+HEPA H14-CGTEXT_PDF_DATASHEET

The Svent purifying units are designed for mobility, purification and cleaning of air and the elimination of odors, in areas of high occupancy where low noise and versatility are important.

ENERGY EFFICIENT

The air intake vent is designed to more efficiently optimize laminar airflow along with the dynamic pressure balancing chamber. The high technology of the E.C. engine is a key element in reducing electrical consumption

LOW NOISE LEVEL

The 25 mm thick with high-quality insulation panels make it suitable for areas and spaces where a low noise level is required.

DURABILITY

The outer panels of these units are made of prepainted metal with 40mm aluminum structural frames to maximize equipment life.

INTEGRATED CONTROL SYSTEM

Fan ON / OFF
Adjustable volume flow 65% - 100%
Anti-bacterial chamber ON / OFF
Built-in timer
Control and alarm of dirty filters
Automatic operation
4 filter stages
Ideal for hospitals and other sectors
Low power E.C. motor technology
Thick acoustic box of 25 MM
WASHABLE PRE-FILTER
The first pre-filter catches small, fluff-type particles along with larger ones and is dishwasher safe.

ANTIBACTERIAL CHAMBER

Depending on the purification unit model, it can be supplied with an integrated antibacterial chamber, using UVc lamps.

MOTOR

Highly efficient E.C. technology, external rotor motor.
1-phase 200-240V - 50 / 60Hz and 3-phase 380-480V– 50 / 60Hz.
Ambient temperature from -25 ° C to + 60 ° C

Geen S-vent Purifying unit gevonden die u zocht? Probeer: Svent purifying unit/EC-400-F7+HEPA H14-CG

Shopping Cart

3 x	Ram Humidifier 1.6Ltr per hour
2 x	Humidifier 6 liter reservoir
1 x	Bladder piece with mesh 45° ⌀ 710 mm
3 x	Bladder piece with mesh 45° ⌀ 400 mm
1 x	Mesh grid 355mm
3 x	The Back Up Emergency Ventilation Box
1 x	Extractor Box Isolated with loose hanging engine 5000M3
1 x	ISO-Box Steel 7000 m3
3 x	Fancontroller FC-1500 (no thermostat)
1 x	RAM stand fan 45 cm
1 x	position switch 5 positions 3 Ampere
1 x	Stand fan Fertraso 40 cm
1 x	Bladder piece with mesh 45° ⌀ 900 mm
2 x	bladder piece with mesh 45° ⌀ 560 mm
1 x	Wall brackets for duct round ⌀ 200 mm
4 x	Tube Clamp max. 170 mm
1 x	Novovent Axial 120 Standaard
2 x	Bladder piece with mesh 45° ⌀ 160 mm
5 x	TechGrow Humi Dual Pro (excl. Sensor)
1 x	Round Fire Damper 250mm
1 x	Wall brackets for duct round ⌀ 80 mm
1 x	Ubbink Rolux Universe HR smoke gas roof terminal 60mm
3 x	Dimlux CO2 sensor for Maxi Controller (Dual-Beam) 10m Cable
5 x	Bladder piece with mesh 45° ⌀ 800 mm
2 x	Centrifugal Ventilator Torin 2500m3
1 x	Perforated Aluminum Air Hose 254 mm 10 meter
1 x	Chimney Cowl with Lattice ⌀ 160 mm
2 x	Centrifugal Ventilator Torin 750m3
1 x	Odor Filter Box Galvanized Steel 6500m3
1 x	Y Piece for air Duct 160-160-160
2 x	Remote Control for Opticlimate
2 x	Stand fan RAM 40 cm
1 x	Chimney Cowl ⌀ 630 mm
2 x	Torin Slakhuis 7000m3/h
1 x	Bend Segmented 90° ⌀ 100 mm
2 x	Bladder piece with mesh
2 x	Techgrow temp/RH sensor 5 meter
1 x	position switch 5 positions 5 Ampere
2 x	Grondventilator Ram 23 cm 40W
1 x	Y Piece and Reducer for Air Duct 200/160/160
1 x	Can Filter 75cm flange 250mm 1000m3
1 x	ISO-Box Steel 250m3
2 x	SMS COM Smartcontroller 6.5AMP+ ex sensor
1 x	Torin Sifan 8 amp (Aric)
1 x	Max Fan Pro Series 250 2 speed 1660m3
1 x	Buisventilator G-tools 160 2-standen 400-800m3/uur
1 x	Nagano Ontvochtiger 360 watt 20 ltr/24hr
1 x	Bend Segmented 60° ⌀ 80 mm
3 x	Duct Reducer Safe 250-315 mm
2 x	RAM Wandventilator 45 cm Heavy Duty
1 x	Svent purifying unit/EC-310-F7+HEPA H14-CG
2 x	position switch 5 positions 11 Ampere
3 x	Bladder piece with mesh 45° ⌀ 180 mm
1 x	Wall brackets for duct round ⌀ 355 mm
2 x	Combideck 357 mm 10 meter
1 x	Bladder piece with mesh 45° ⌀ 200 mm
2 x	Biogreen Palma 2KW kachel
2 x	Ralight Wall Fan 45 cm
1 x	Bend Segmented 45° ⌀ 500 mm
2 x	Boxfan 30 Fertraso cm 3 speed
1 x	Techgrow S2 CO2 Sensor (tot 2000ppm)
2 x	Rubbers for hanging
1 x	extractor crane
1 x	Svent purifying unit/EC-400-F7+HEPA H14
3 x	TechGrow Minimum Fan Speed Controler
1 x	Opticlimate 10000 PRO 3 Split
4 x	Centrifugal Ventilator Torin 3250m3
1 x	Svent purifying unit/EC-500-F7+HEPA H14
1 x	Bend Segmented 15° ⌀ 100 mm
1 x	Techgrow Clima 5A (Min-Max) excl. Sensor
1 x	Carrier terminal M10
2 x	Volt Controller 3000 Watt
1 x	Deflector Cap ⌀ 630 mm
4 x	Elbow 90 degrees 170 x 70 mm
2 x	Combideck 50 mm 10 meter
1 x	CO2 Pressure reducing valve with magnetic valve
1 x	Duct Heater diameter 315 mm, 2.4 kw
1 x	SVTT250 diam 250cm 1110/1400 m3/h
1 x	Bend 90 degrees insulated 160 mm
1 x	Wall brackets for duct round ⌀ 100 mm
1 x	Bladder piece with mesh 45° ⌀ 225 mm
1 x	Tube Fan VENTS 100mm 107m3
2 x	Ground Fan RAM 40cm 3 speed
1 x	Bend Segmented 30° ⌀ 150 mm
2 x	T55 Thermostaat (Voor TMA)
1 x	Zadelstuk 400-355
1 x	Duct Tape 50 meter
1 x	Rubbers for hanging Big
1 x	Centrifugal Ventilator Torin 250m3
1 x	Duct Heater diameter 160 mm, 2.4 kw
1 x	Chimney Cowl with Lattice ⌀ 200 mm
1 x	Torin Sifan 16 amp (Aric)
1 x	Collapsing Channel 170x70x3000 mm
1 x	Volt Controller 500 Watt
1 x	Check Valve 160 mm
1 x	Max Fan Pro Series 160 2 speed 615m3
2 x	Volt Controller 1000 Watt
1 x	Ground Fan Fertraso 45cm 3 speed
1 x	Opticlimate 10000 PRO 3
1 x	Buisventilator G-tools 160 tempeatuur gecontroleerd
1 x	Throughput Roof 15° ⌀ 630 mm
1 x	Ram Humidifier 13 liters
1 x	Mesh grid 250mm
1 x	Back Up Ventilation Systeem Flowkeeper
1 x	Throughput Roof 30° ⌀ 250 mm
1 x	Bladder piece with mesh 45° ⌀ 280 mm
1 x	lattices 400x400x20 mm
2 x	Wall brackets for duct round ⌀ 150 mm
2 x	Klipfan 15 cm 13 Watt
1 x	Bladder piece with mesh 45° ⌀ 500 mm
1 x	Verbindingsstuk 200 mm
1 x	Verbindingsstuk 250 mm
1 x	Additional cooling coil for Opticlimate Split 6000 per meter
1 x	Can Inline Filters 1000 M3
1 x	Can-Fan ec Controller
1 x	Nagano Dehumidifier 10 ltr/24 hour
1 x	Screw Cap K2 (16 Amp)
2 x	Techgrow T2 Pro CO2 Controller (ex sensor)
1 x	Flange steel 165 mm
1 x	Can Filter 333 flange 160mm 350m3
1 x	Y Piece for air Duct 80-80-80
1 x	Island Model Extractor Hood 4000x2000x45 mm
1 x	Techgrow temp sensor 5 meter
1 x	Verbindingsstuk 355 mm
1 x	Threaded rod 10 mm 1 meter
1 x	Secret Jardin Monkey Fan 20Watt Osc.
1 x	Throughput Roof 30° ⌀ 180 mm
1 x	Saddle piece 400-300
1 x	Chimney Cowl ⌀ 600 mm
1 x	Centrifugal Ventilator Torin 4250m3
1 x	Bladder piece with mesh 45° ⌀ 630 mm
1 x	Vibration Isolator feathers Opticlimate 6000pro3
1 x	Zadelstuk 400-400
1 x	Threaded rod 8 mm 1 meter
1 x	Saddle Piece 315-250
1 x	Plastic Air distribution hose 160mm x5 m
2 x	HS-1 Portable CO2 Meter/Monitor
2 x	Centrifugal Ventilator Torin 500m3
1 x	Plastic Air distribution hose 250mm x 10m
1 x	Bend Segmented 30° ⌀ 160 mm
1 x	Ground Fan Ram 30cm3 speed
1 x	SMS COM Smartcontroller 6.5AMP + Temperature sensor
1 x	Bladder piece with mesh 45° ⌀ 355 mm
1 x	Textile Air distribution hose 315mmx5m
1 x	Clean Air Luchtreininger CA509D
1 x	Opticlimate 15000 PRO 3
1 x	Odor Filter Housing Galvanized Steel 2500m3
1 x	Boxfan 30 RAM cm 3 speed
1 x	Y Piece and Reducer for Air Duct 250/160/160
1 x	anti-grease filters F7 287x595x360 mm
1 x	Techgrow T1 CO2 Controller (ex sensor)
1 x	Control Valve 160 mm
1 x	Wall brackets for duct round ⌀ 250 mm
1 x	Check Valve 400 mm
1 x	Fancontroller with thermostat.
1 x	Nedco Globe grid 150mm
1 x	Combideck 127 mm 10 meter
1 x	Afdichtdop Spirobuis 450 mm
1 x	Spirotube ⌀ 400 mm long, 3 meter thickness 0.6 mm
1 x	ISO-Box Steel 2500 M3
1 x	Plug Ground Edge

€ 61701,20

Quick Find

What's New?

Duct Reducer 160-200 mm
€ 9,00

Svent purifying unit/EC-400-F7+HEPA H14-CG

Aanverwante producten